Welcome to
Projects by Vinny Vincent, Littleton, Mass., USA
Contact Vinny
Child's Vanity
Vinny writes - I made 2 of these Vanities for my granddaughters. They're made from 3/4" Birch plywood except for the legs which are Pine. The table height is 24" and it's 30" wide. I finished it with an oil based semi-gloss paint and my wife decorated it with stencils.


FREE
plans are available for the Vanity at Vinny's Web Site
Turned Pens

Vinny writes - I made this set from Bubinga, exotic wood from Africa, and tried to be a little creative this time. I made them as a gift for my daughter. It might be small, but I'm finally learning how to turn.
To see more about this or other turning projects from Vinny
click here
Mobile Workstation

Vinny writes - I made this for a local business in town that was looking for a moveable workstation. The desktop opens, the back column is open for storage, and it's on wheels. It's made from Red Oak with a semi-gloss poly finish. Height is approximately 45".
Lotto / Photo Booth

Vinny writes - Here's a project for my local grocery store. It's going to replace their lottery and photo drop booths. You know, those plastic boxes with all the tacky advertising. The sides and bottom of the carcass are 3/4" oak veneer plywood, the back, 1/2" oak plywood. I made a pair of raised panel doors for this project, since these doors may get a little rougher treatment than cabinet doors in your home, so I decided to experiment with pocket hole joinery. My
Kreg Pocket Hole Jig allowed me to setup and drill pocket holes quickly and easily.
Bathroom Tissue Holders

Vinny writes: - I made these for our house, made of Oak and are designed to inset into the wall.
Gun Display Cabinet

Vinny writes - These 3 pictures show the gun cabinet I made for a customer who is a serious gun collector. It is made of solid Oak and Oak vaneer plywood. It features raised panel doors and inset drawer pulls. Each drawer contains a matrix designed to hold different sizes of pistol magazines, shown here in the picture on the right.
Horse Stable - Corral

Vinny writes - I made this horse stable and corral for my horse-loving granddaughters. I looked at lots of pictures and came up with this design. The barn is made primarily made of 1/2" plywood. I used spray poly to finish each piece.

To see how Vinny made this -
Click Here
Treasure Chest

Vinny writes - I made Treasure Chest as a Christmas present for my grandson in 2005. It is made of 1/4" Maple, I distressed it somewhat, stained with Ebony stain and finished with 3 coats of spray-on satin poly.
Framed Mirror w/Shelf

Vinny writes - I made this Framed Mirror out of Poplar and painted white. It has a small shelf and Shaker Pegs just below the shelf and accented with a small heart just above the shelf.
Click Here To View Other Galleries